(907) 344-1450

Manufacturing Aircraft Skis Since 1955

Airglas Products

You are here: Home

Browse the rebuilt Airglas product catalog by family, aircraft compatibility, or individual product detail page.

EB180: EB180 Extended baggage

The Extended Baggage EB-180 manufactured by Airglas, Inc. was designed for the early model Cessna 180’s. Early model airplanes had only the standard baggage compartment, from behind the rear seat (fuselage station F.S. 90) to the rear cabin wall (F.S. 108). After about 67’ Cessna started installing a factory extended baggage that goes from (F.S.108) to the next bulkhead aft (F.S.140). Our Extended Baggage is similar to the factory one as far as location and maximum weight allowed. Weight: 5.5 lbs STC Certified on: Cessna 180, 182, & 185 C-170 is coming soon Product Highlights: Fits Cessna 180, Models A-K with the battery moved from the original location. FAA approved for maximum weight of 50 pounds. The extended baggage consists of two pieces, a bulkhead, and a floor panel. The bulkhead panel attaches to the front of the bulkhead at F.S. 140, the floor panel then attaches to the bottom front of the bulkhead panel and slopes forward and down to the floor of the standard baggage compartment at F.S. 108. Construction: Both the bulkhead and floor panel are constructed of vacuum bagged carbon fiber and epoxy resin. Dark gray surface that can be left as is, or can be scuff sanded and painted to match your aircraft interior.

$1,750.00

L3000: L3000 Straight Ski

The L-3000 ski have stood the test of time. They have been on C170's, C180's, and C185s for over 40 years. The Fiberglass construction withstands the daily abuses of winter flying. These simple and light weight skis are easy to install and take your 170, 180, or 185 to any snowy location. Certified On: Cessna 170, 170A and 170B Cessna 180 and 185

$7,000.00

LH4000: LH4000 Hydraulic Ski

The LH-4000 Hydraulic Wheel Ski is for those that need the ultimate ski utility, hard surfaces and maximum performance on the snow. The LH-4000 is a thermoplastic ski incorporating some of the latest technological advances in materials making it stronger and lighter than other skis. When in the Ski position, a hydraulic cylinder drives a carbon door under the wheel, making the bottom flush on the snow. The LH-4000 performs as well or better than a straight ski, yet offers the versatility being able to use the wheels when you need them. Certified On: Cessna 180/185 & Found-Bush Hawk

$22,800.00

LW3600 FTW LW3600 FIXED TAIL WHEEL MOD.

This Modification is designed to replace existing Scott/Lange Tail Wheels. Fits All Skis Manufactured Prior to 2006 Reduces Drag, Weight, and Maintenance. Complete kit is cheaper than replacing only one Scott/Lange tail wheel assembly. Weight savings is approx. 10 pounds per ski kit

$10,700.00

LW3600: LW3600 Fixed Penetration Skis

The LW-3600 is a two position fixed penetration ski mounted to the stock landing gear and axles. The fixed penetration ski offers the convenience of wheels for getting off and on the hard surface as well as great performance in the snow. The light weight, yet very durable, fiberglass construction and the large surface area provide loads of flotation even in the deepest snow. Certified On: Cessna 180/185

$10,700.00